Sonel KT-640, Руководство пользователя

Страница: 64 / 78

SONEL KT-640 THERMAL IMAGER 64
Film Path: choose the folder where the recorded video files will be saved (by default it is
set to a \IRVideo subfolder at the place where the program is installed).
Capture Saved Path: choose the folder for captured images.
Frame rate: choose the number of images registered per second (25 by default).
Default Palette: set the palette used in video mode.
Kinescope rate: defines the image saving cycle interval (e.g. 1 - every frame will be
stored; 5 - every fifth frame will be stored). In some situations there is no need to capture
all frames. Using this option allows to save space on hard drive/SD card.
Update track view: frequency of refreshing information for each point.
12.4. Recording infrared video in real time.
Use " Device Video... " tab to get the video output directly from the camera into Sonel
ThermoAnalyze program.
Connect the camera to PC by inserting USB interface into (7) socket. The camera should
run in real time mode, with no menu or command available on screen.
Note: Switch on the camera and wait until its internal tests are completed, before connect-
ing it to PC. Is is advised to connect it before launching Sonel Thermo Analyze program.