Sonel KT-640 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 78

Sonel KT-640 Скачать руководство пользователя страница 34

SONEL KT-640 THERMAL IMAGER

34

NOTE!

Use only the battery, AC adapter and external battery charger supplied along with

the camera.

NOTE!

Do not remove the battery from the camera while it’s being charged.

NOTE!

Battery charging should be performed in 0...40

°

C temperature range.

10.3. Charging battery in external battery charger.

NOTE!

Switch the camera off before removing the battery.

To remove the battery from the camera, pull the battery comprtment cover's (8) prong (26)
and open the battery compartment cover:

Push the battery lock lever (27) above the battery and the battery will partially slide out of
the compartment, allowing to remove it.
After inserting the battery into charger and after connecting power supply, the charger will
make audible sound and will display "**Hr**Min" on screen to inform about the battery
charge status. After finishing the charging procedure charger will also make audible sound
and will display "FULL" on screen to inform about the battery being completely charged.

«
...
32
33
34
35
36
...
»

Содержание KT-640















































































Отзывы:

Нет отзывов