USER MANUAL
29
'OK' button (
)
or by pressinf ‘right’ buton (
).When edit mode is on, the symbol
is displayed next to the value set for editing.,
increasing or decreasing the value of the edited parameter is done by pressing 'up/down'
buttons (
or
).
Confirm selection by pressing ‘OK’ buton (
) or ‘right’ buton
(
),exit without saving changes by pressing 'left' button (
) . Go back to temperature
measurement mode, after saving changes, by pressing 'Exit' button (
) .
Depending on the selected alarm type, moving cursor in the area analysis mode will be
marking point of the highest, or the lowest temperature, changing its colors as described
in 4.7.2.2 and 4.7.2.3.
