THERMAL IMAGER SONEL KT-80 and KT-145
28
4.6.5.2
°C, °F, Temperature unit selection
Select
‘°C, °F, Unit’ to open up a window with temperature measurement unit selection.
Available options are: ‘°C’ – Celcius degrees or ‘°F’ – Fahrenheita degrees. Make selec-
tion by pressing 'up/down' buttons (
or
).
Confirm selection by pressing ‘OK’ buton
(
) or ‘right’ buton (
),exit without saving changes by pressing 'left' button (
) .
Go back to temperature measurement mode, after saving changes, by pressing 'Exit' but-
ton (
) .
4.6.5.3 Temperature Alarm (only in KT-145)
Select 'AlarmTemp' to open up a window where the threshold values for minimum and
maximum temperature can be set. Set High, to activate the alarm when the temperature is
higher than selected value. Set Low to activate the alarm for temperatures below the se-
lected value.:
Switching between High and Low fields is done by pressing 'up/down' buttons (
or
),
while editing those values is done by selecting (highlighting) field for editing and pressing
