16
• If you do not answer the call, approx. the monitor will turn off after one
and a half minutes.
• In ANSWER mode, depending on the status of the SETTING menu, you
can take a manual photo or video by pressing the SETTING button on
the side of the monitor. A recording is made automatically at the moment
of ringing.
CALL FORWARDING BETWEEN THE INDOOR UNITS
If the conversation with the visitor is already taking place as described
above, you have the option of a second indoor unit - e.g. to a more distant
room - forward the call to a family member.
Press the INTERCOM button and a ringtone will sound.
You can answer the call on the other indoor unit with the ANSWER
button.
If it has an electric lock, the visitor can also be admitted from the sec-
ond device with the lock release button.
Hang up the conversation.
• When you forward a call, the first indoor unit turns off and the target unit
rings. At the same time, the visitor’s image is displayed on the screen.
• Call forwarding only works if one unit has “MASTER” and the other
“SLAVE” in the menu and they are connected properly.
VIEW
In standby mode, you can check the area around the entrance (approx.
60s) by pressing the VIEW button. You can hear what is happening outside,
but your voice cannot be heard through the speaker of the outdoor unit.
2 external camera units and 2 additional cameras can be connected to the
indoor unit at the same time. If all are enabled in the SETTING menu, up to
4 camera images can be viewed in succession on the indoor unit.
By pressing the VIEW button, you can scroll through the images of the
cameras for approx. operating them for 60-60 s in a row: DOOR1-CAM1-
DOOR2-CAM2, then turn off the monitor
In the meantime, if you want to talk to a person near that outdoor unit,
press the ANSWER button.
If you have an electric lock, you can let the visitor in with the lock
release button.
Finally, hang up the conversation and turn off the screen.
• If you have only one outdoor unit, you can exit this function by pressing
the VIEW button again - or exit automatically after approx. 60 s. In the
SETTING menu, the other camera options must be turned off: DOOR2,
CAM1, CAM2.
• In case of two indoor units, you can initiate the viewing of images from
outdoor cameras on each.
• If a conversation with the outdoor unit is in progress while the CALL button
is pressed on another outdoor unit, the conversation will be interrupted
and the new visitor’s image will be displayed on the monitor with a ringing
tone. The call must then be answered with the ANSWER button.
• In VIEW mode, depending on the status of the SETUP menu, you can
take a manual photo or video by pressing the SETUP ( ) button on
• •
•
the side of the monitor.
TAKING A PHOTO OR VIDEO RECORDING
When the visitor rings or the buildable surveillance-alarm system alarms a
photo or video is taken automatically - depending on the menu settings you
can also use the side SETTING button to take recordings manually while
talking or using the view function. In PHOTO mode, you can store about
80-120 photos in the internal memory (64M), which can be expanded with a
microSD card. The amount (size) of photos depends on their content, such
as lighting conditions and colors.
To insert the VIDEO mode, a memory card (not supplied) is required. One
of the two recording options must be selected in the MODE menu. The
completed recordings can be viewed and managed in the FILES menu.
• Some video recordings that can only be made on a memory card are
about 14 seconds long.
• The recommended microSD card must be at least CLASS10 class and
up to 32GB in size.
• A symbol flashes in the center of the top bar of the screen during suc-
cessful shooting. On the left is the name of the active camera (DOOR1,
DOOR2, CAM1, CAM2).
• When you select a recording in the FILES menu, the SETUP button pro
-
vides three options: view, delete the photo or video, or delete all record-
ings.
• The names of the files include the date and time they were created.
• Photos are taken in JPG format and videos in AVI format. You can also
view the recordings by transferring the memory card to a computer.
• You can copy (back up) photos stored in the internal memory to the mem-
ory card: SYSTEM / INFORMATION / BACKUP PICTURES
VIEWING THE IMAGE OF THE OUTDOOR CAMERAS ON TV
You can display the current image of the indoor unit on a TV or monitor with
video input. To do this, connect the TV-G (VIDEO OUT) connector on the
back of the indoor unit to the TV using a custom-made connection cable
(optional). To do this, consult a specialist.
As the system can also be expanded with opening sensors and surveillance
cameras - see the wiring diagram - an image of an unauthorized intruder
can even be displayed on the television immediately while recording.
INTERCOM: CONVERSATION BETWEEN THE INDOOR UNITS
If you have at least two indoor devices, they can call each other in standby
mode.
Press the INTERCOM button and the ringtone sounds.
Answer the call with the ANSWER button on the indoor unit.
Finally, hang up the conversation.
• If a visitor arrives during an internal conversation, the conversation is inter
-
rupted, a ring tone is heard, and the visitor is displayed on the screen. As
usual, the call must be answered with the ANSWER button.
• The InterCom function only works if one unit is set to “MASTER” and the
other to “SLAVE” in the menu.
MENU SETTINGS
On the right side of the monitor - going from top to bottom - is the microSD
memory card slot for photos and videos, the SETTING (gear) button, the
up / down scroll buttons and the volume control of the monitor speaker.
SETTING button: take a photo or video during a conversation or view
/ activates the MENU function in standby mode / enters the selected
submenu and function / confirms the selected parameter
SCROLL buttons: you can select the desired menu / move for-
ward-backward in the different lists / change the parameters / setting
• If you use the scroll buttons to select the RETURN symbol and then press
the SET button, you can move up one level until you exit the menu.
• You can also exit the setup menu with the HANG UP button
• If you do not operate the unit, it will exit the MENU automatically after
about 60 s.
Press the SETTING button to display the main MENU. Use the SCROLL
buttons to select the desired menu item and confirm with the SETTING
button. Most menus have additional submenus or other setting options. You
can access them and select a function in a similar way. When you have
made the setting, go back one level by selecting the RETURN icon and
then pressing the SETTING button.
• •
•
a numerical value
