22
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
-
Press the down button on the new
Situo RTS:
If the product is lowered, the Situo
-
RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original Telis must be deleted, go
-
to paragraph 5.7.2 "Deleting the origi-
nal Telis".
If the original Telis is retained, please
-
refer to the “Mounting the bracket”
section to finish installing the Situo
RTS.
5.6.2 Deleting the original Telis
(optional)
N.B.: Only follow this procedure if use of
the original Telis is no longer required.
Warning! Before deleting a Telis Soliris,
contact the Somfy assistance service
to check the compatibility of the control
point with the product.
Wait 5 minutes.
-
-
Take the front cover of the new Situo
RTS and turn it over to access the
PROG button (E).
Press the PROG button (E) on the new
-
Situo RTS until the product moves brie-
fly (or emits a series of 3 beeps): the
programming function of the control
point is activated for approximately
2 minutes.
-
Select the indicator light which corres-
ponds to the product only, on the origi-
nal Telis, with button (f).
-
Briefly press the PROG button (g) on
the original Telis with the tip of a pencil:
the product moves briefly (or emits a
series of 8 beeps) to indicate that the
original Telis has been deleted.
E
g
f
g
