14
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
-
Briefly press the PROG button (E) on
the new Situo RTS: the product will
again move briefly (or emit a series of
8 beeps) to indicate that the new Situo
RTS has been programmed.
-
Press the down button on the new
Situo RTS:
If the product is lowered, the Situo
-
RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original control point must be dele-
-
ted, go to paragraph 5.3.3 "Deleting an
original control point".
If the original control point is to be kept,
-
refit the front cover:
Insert the mounting lugs into their
-
notches on one side of the front
cover.
Press on the other side until it clicks,
-
to fit the front cover in its bracket.
Refer to the “Mounting the bracket”
-
section to finish installing the Situo
RTS.
5.3.3 Deleting an original control point
(optional)
N.B.: Only follow this procedure if use
of the original control point is no longer
required.
Wait 5 minutes.
-
-
Take the front cover of the new Situo
RTS and turn it over to access the
PROG button (E).
Press the PROG button (E) on the new
-
Situo RTS until the product moves brie-
fly (or emits a series of 3 beeps): the
E
E
14
