17
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
RTS has been programmed.
-
Press the down button on the new
Situo RTS:
If the product is lowered, the Situo
-
RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original control point must be dele-
-
ted, go to paragraph 5.4.3 "Deleting an
original control point".
If the original control point is to be kept,
-
refit the front cover:
Insert the front cover on its brac-
-
ket, allowing the buttons to come
through their housings.
Press the front until it clicks, to fix
-
the front cover in its bracket.
Refer to the “Mounting the bracket”
-
section to finish installing the Situo
RTS.
5.4.3 Deleting an original control point
(optional)
N.B.: Only follow this procedure if use of
the original timer is no longer required.
Wait 5 minutes.
-
Take the front cover of the new Situo
-
RTS and turn it over to access the
PROG button (E).
-
Press the PROG button (E) on the
Situo RTS until the product moves brie-
fly (or emits a series of 3 beeps): the
programming function of the control
point is activated for approximately
2 minutes.
-
On the original timer, briefly press the
tab (c): the product moves briefly (or
emits a series of 8 beeps) to indicate
that the original control point has been
E
c
