12
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
Refer to the “Mounting the bracket”
-
section to finish installing the Situo
RTS.
Model B:
Wait 5 minutes.
-
-
Take the front cover of the new Situo
RTS and turn it over to access the
PROG button (E).
Press the PROG button (E) on the new
-
Situo RTS with the tip of a pencil until
the product moves briefly (or emits a
series of 3 beeps): the programming
function of the control point is activated
for approximately 2 minutes
-
Remove the battery from the original
control point using a plastic object.
Press on the centre section of the one-
-
touch point button.
Refit the battery in the base of its
-
housing (with text legible).
Press the button on the front cover
-
again: the product moves briefly (or
emits a series of 8 beeps) to indicate
that the original control point has been
deleted.
Press the one-touch point button: the
-
product does not move.
-
Press the down button on the new
Situo RTS:
If the product is lowered, the Situo
-
RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
Remove the one-touch point.
-
Do not dispose of the original control
point with household waste, see para-
graph 2.3.
Refer to the “Mounting the bracket”
-
section to finish installing the Situo
RTS.
E
