16
Situo RTS
Copyright © 2008 Somfy SAS. All rights reserved.
5.4 Timer
Move close to the product to install the
Situo RTS.
5.4.1 Checking the compatibility
-
Bring the product to the midway
position.
Cut off the mains power supply.
-
Remove the front cover of the original
-
control point:
Lever it with a flat, pointed tool
-
(such as a flathead screwdriver),
without using force, around the
upper section of the front cover to
detach it from its mounting.
-
The PROG button is located on top
of the screen and is shaped like a
tab (c).
Caution! Once the front cover has been
removed, if there is no PROG button
then the control point is not compatible:
the Situo RTS cannot be linked to the
product.
5.4.2 Adding the Situo RTS
Switch the mains power supply back
-
on.
-
Press the tab (c) until the product moves
briefly (or emits a series of 3 beeps):
the programming function of the control
point is activated for approximately
2 minutes.
Take the front cover of the new Situo
-
RTS and turn it over to access the
PROG button (E).
-
Briefly press the PROG button (E) on
the new Situo RTS: the product will
again move briefly (or emit a series of
8 beeps) to indicate that the new Situo
c
c
E
