Rollixo RTS
Copyright © 2012 Somfy SAS. All rights reserved
15
EN
orange LED (part no. 9017842)
Dipswitch 3 receiver set to ON → 2-second warning activated
Dipswitch 3 receiver set to OFF → No warning
key lock
Successive presses cause the motor to move (initial position: door closed) as
per the following cycle: open, stop, close, stop, open, etc.
Alarm
For the alarm to operate, it is essential to install a radio safety edge and program at least one remote control.
24V dc
24V C
ge
KeySwitch
Flash
9
10
11
12
13
16
17
14
15
24V
Sec
Safety Edge
KeySwitch
Flash
7
8
9
10
11
12
13
14
1
•
Installing and connecting the alarm
Mount the alarm to the receiver with the bolt provided.
Connect the alarm connector.
•
Activating/Deactivating the alarm
Dipswitch 5 receiver set to ON → Alarm activated
Dipswitch 5 receiver set to OFF → Alarm deactivated or not connected
•
Alarm operation
The alarm is triggered for 2 minutes if the door is raised manually.
No movement of the door is possible when the alarm is sounding.
When the alarm sounds, press a button on a remote control memorised in the
receiver to stop it. The alarm can only be stopped with a memorised remote
control.
4 W max.
•
Alarm operation test
Press simultaneously on buttons
STOP
and on the receiver.
The alarm triggers briefly to indicate that it is activated.
3
4
2
1
Prog
STOP
•
optional: lower magnet
A lower magnet may be installed if the alarm sounds erratically (see page 9).
