6
EN
oPEration
operation in sequential mode
All the programmed 2 or 4 button remote controls have the same mode of operation.
Successive presses of the same control button will lead to the following movements of the motor:
open, stop, close, stop, open etc.
1m
complete opening of the gate
by pressing
button 1.
open the gate completely
by pressing
button 1.
Partial opening
of the gate (approx 1 m) by
pressing the activated button.
complete opening
►
Pedestrian opening
►
close
the gate by pressing the activated
button.
close
the gate by pressing button 1 again.
stop
the gate when moving by pressing
button 1 again.
Pedestrian opening is achieved by pressing a button on the remote control that requires prior
activating (see p. 10).
