Somerdata R2D3-ASSY-0130, Установка и эксплуатация

Страница: 58 / 76

R
2
D
3
Data Capture Card
Installation and Operation 7-6
Handling Precautions
•
Never slide cards or other parts over any surface
•
Avoid static-causing surfaces, such as plastic and polystyrene, in
your work area
•
Remove the R2D3 card from its anti-static packing only when
you are ready to use it
•
Do not lay the R2D3 card on the outside of the anti-static
packing, as only the inside of the packing provides anti-static
protection
•
Always hold the card by its edges and metal mounting bracket
•
Avoid touching components on the card and the edge connectors
that connect to expansion slots
Card Installation
•
Before installing the card, ensure that +3.3 Volts and +5 Volts
are provided on the PCI connector; otherwise the
R2D3 card will
not function.
•
Refer to the PC system manufacturer’s documentation for
instructions on opening the system case and installing PCI option
cards.
•
Use the above Grounding Procedure to open the PC system,
and ground yourself.
•
Remove the screw that holds the metal plate over one of your
system’s empty PCI expansion card slots
•
Press the card straight into the PCI slot. Make sure that you
push evenly on both edges until the card is firmly seated. You
may need to press in on the bottom of the metal bracket to keep
it from catching on the case. It may be necessary to slightly rock
the card end-to-end, but do not bend the card sideways
•
Secure the card to the case with the screw you removed in
Step 3
•
Replace the cover and the cables on the back of the system, but
do not fasten the screws yet
•
Tighten down the system cover once you have verified that
everything works