Somerdata R2D3-ASSY-0130, Установка и эксплуатация

Страница: 21 / 76

R
2
D
3
Data Capture Card
Installation and Operation 2-7
Data Interface
Depending upon the card version, signal connections are via
one pair of BNC connectors or one RJ-45 connector for each
input/output bitstream.
The data interface supports ITU (G.703/G.704) 2,048 kbits/s
input and output data transfers.
On-board Buffer
The card uses on-board memory to buffer data to and from the
PCI Bus, with 16 Mbits of SDRAM.
Applications
When installed in a suitable personal computer and
accompanied by appropriate software,
R2D3 can be used to
support applications such as: recording & replay, real-time
monitoring & analysis, data sharing, store and forward, signal
generation.
System Requirements
Pentium™ class Personal Computer (200 MHz minimum) with
at least 128 Mbytes system memory (RAM) and the following:
•
PCI 2.1 or PCI-X, depending on version (see above)
•
1 Free PCI slot
•
Motherboard with +3.3 Volts and +5 Volts power on the
PCI connector