Somerdata R2D3-ASSY-0130, Установка и эксплуатация

Страница: 50 / 76

R
2
D
3
Data Capture Card
Installation and Operation 6-2
Input Signal Loss
The Signal Loss LEDs will light when the input signal contains
more than 175 consecutive zeros.
Buffer Threshold Trigger
The Buffer Threshold LEDs will light when the amount of data
in the buffer is above (input data transfers) or below (output
data transfers) the threshold point.
Power and Self-Test
If the card is not communicating with the device driver or
control software, check the Power/Self-Test LED.
If this is not lit green, this usually means that either:
the motherboard does not support PCI cards that
require 3.3V
the programming link (PL3) is damaged or missing
Card is powered and has passed self-test
Stream A - Input Signal Loss
Stream B - Input Signal Loss
Stream A - Buffer threshold trigger
Stream B - Buffer threshold trigger