14 UM0012_ASW 5-10k Series_EN_V03_0522
2. After drilling holes in the wall, place three screw anchors into the holes, then
attach the wall mounting bracket to the wall using the self-tapping screws
delivered with the inverter.
3. Position and hang the inverter onto the wall bracket ensuring the two studs
located on the outer ribs of the inverter are slotted into the respective slots
in the wall bracket.
Risk of injury due to the inverter falls down
•Before inserting the wall anchors, measure the depth and distance of the
holes.
•If the measured values do not meet the hole requirements, redrill holes.