EZL-200F User
’
s Manual Ver. 2.1
Sollae Systems Co., Ltd.
- 20 -
http://www.sollae.co.kr
3.3
AT command
In the AT command mode, you can change some parameters through the serial port.
Checklists
Make sure the connection between your PC and EZL-200F using RS232 cross cable. To
use this, EZL-200F has to be set to [AT command] mode as its communication mode.
This can be configured by ezConfig.
Fig 3-6 setting the communication mode to the AT command
Procedures
Fig 3-7 procedures for configuration with AT command
Table 3-2 parameters which are available to change with AT command
Division
Available parameters
IP Address related items
Local IP Address, DHCP, PPPoE, Subnet Mask, Gateway IP
Address, ···
TCP connection related items Local Port, Peer Address, Peer Port, ···
Option
MAC address search, timeout, ···
Including above items, rest of parameters can be set by ezConfig
