EZL-200F User
’
s Manual Ver. 2.1
Sollae Systems Co., Ltd.
- 11 -
http://www.sollae.co.kr
2
Installation and Test
2.1
Installation
Before testing 200F, connect both serial and Ethernet port to your PC. It will be no
problem that the Ethernet connection includes network hubs.
Fig 2-1 connection between 200F and a PC
Procedures for the test are followed.
2.1.1 Setting Network Aera
This step is for setting both EZL-200F and users’ PC to be located the same network. If
only they are, the TCP connection between them can be established.
Setting of the PC
Add or change the IP address of the network adapter on your PC like following.
Get into the menu of [Windows Control Panel] >> [Network Connections] >>
[Properties of the Network Adapter – with right click of your mouse]. Then, you can
show the properties of [Internet Protocol (TCP/IP). In there, press the [Advanced..]
button for adding an IP Address like the below figure.
Fig 2-2 adding / changing the IP address of users’ PC
