EZL-200F User
’
s Manual Ver. 2.1
Sollae Systems Co., Ltd.
- 32 -
http://www.sollae.co.kr
5.3
AT Command
AT command is a mode which users control EZL-200F with AT command like controlling
modem. In this mode, active and passive TCP connections are available. And users are
allowed to configure some environmental parameters with extended commands.
5.3.1 Key parameters
The configuration should be implemented via the serial port of 200F
Table 5-6 some of extended commands for configuration
Commands
Description
Examples
+PLIP
Local IP Address
AT+PLIP=10.1.0.1<CR>
+PLP
Local Port
AT+PLP=1470<CR>
+PRIP
Peer IP Address
AT+PRIP=10.1.0.2<CR>
+PRP
Peer Port
AT+PRP=1470<CR>
+PDC
DHCP
AT+PDC=1 (ON)<CR>
+PARP
Temporary IP assignment
AT+PARP=1<CR>
+PTO
Timeout
AT+PTO=10<CR>
+PWP
Store setting
AT+PWP<CR>
Related items with IP Address and Local Port
Local port can be set as well as IP address related parameters like IP Address, Subnet
Mask and Gateway IP Address.
Peer Address / Peer Port
IP address and local port of a remote host are can be set.
Type of assigning IP address: Manual, DHCP
Not only manual setting, also automatic assigning protocol (DHCP,) is available.
Others
Some of options including [Timeout] can be configured in this mode.
