CSW-H85K2 User Manual Ver. 1.2
- 63 -
7.1.5
Using WPA-Enterprise
⚫
Configuration of the Access Point
Set the WPA-Enterprise for authentication and radius server to communicate. If you
do not know how to set AP
’
s parameters, refer to the manual or ask the manufacturer.
CSW-H85K2 supports EAP-TLS / TTLS and PEAP.
⚫
Configuration of the product
Select one of authentication protocols on 802.1X item in the Security Settings.
Protocol
required configurations
EAP-TLS
ID of radius server account, client certificate
EAP-TTLS
ID and passphrase of radius server account
PEAP
ID and passphrase of radius server account
Table 7-4 802.1X item
Caution: Maximum length is restricted to 32Bytes for ID and 16Bytes for password.
⚫
How to use EAP-TLS
In the case of EAP-TLS, a certificate is needed to save by ezManager.
The procedures are as follows:
①
Configure the ID of radius server account
②
Check the [Advanced Menu] option and click the [Certificate] button
Figure 7-2 Certificate button
③
Save the client certificate made by radius server
Figure 7-3 saving client certification
③
Input password for the certificate
④
Check the information of the certificate