CSW-H85K2 User Manual Ver. 1.2
- 46 -
5.3.2
Examples
⚫
TCP Server
–
setting parameters and passive connection
Figure 5-7 time chart
Time
States
~
configuring parameters with AT commands
①
ATA command has arrived.
~
CSW-H85K2 listens to TCP connection requests.
②
A remote host sends SYN segment to CSW-H85K2.
~
processes of TCP connection
③
TCP connection is established.
~
CSW-H85K2 sends
“
CONNECT
”
message to the serial port.
Table 5-11 states of each point
Some of the response messages from the serial port of CSW-H85K2 are omitted
on above figure.