CSE-M32 Users
’
Manual Ver. 2.2
Sollae Systems Co., Ltd.
- 42 -
http://www.sollae.co.kr
9
Checking & Debugging
If user logs in the CSE-M32, user can monitor CSE-M32 status. And if user sets the
debugging option, user can get debugging data with ezManager.
9.1
Telnet
9.1.1
Telnet Login
If the [Telnet] parameter is set, user can log in the CSE-M32. User can monitor the status
of the serial ports and the network.
If user inputs “telnet [CSE-M32 IP Address]”, user can log in the CSE-M32 with telnet.
Then the following message will be shown.
9.1.2
Commands
Network Status
User can monitor network status of CSE-M32 with the “st net” command.
Serial Ports‟ Status
User can monitor the statuses of two serial ports with the “st sio” command. The
tx_count and the rx_count are the total data sizes to/from the serial ports.
