CSE-M32 Users
’
Manual Ver. 2.2
Sollae Systems Co., Ltd.
- 22 -
http://www.sollae.co.kr
4.5
IP Address settings via PPPoE
PPPoE is used in most ADSL and VDSL. To use PPPoE function, PPPoE function should be
enabled and PPPoE ID and PPPoE password should be configured. The local IP address of
CSE-M32 is assigned automatically in PPPoE environment.
Some ADSL or VDSL environment uses DHCP based on the modem type. Please contact
your internet service provider for further information.
4.6
Notify IP Change
In internet environment, most host get IP addresses dynamically. In this case, it is very
hard to communicate to the host because the IP address is changed dynamically. The IP
Change Trap service solves this problem. There are 3 types- DDNS, TCP and UDP- for this
service.
4.6.1
DDNS (Dynamic Domain Name System)
If the CSE-M32 obtains its IP address, it notices to the service provider. Then the service
provider serves DNS service. So, even though user doesn‟t know the CSE-M32‟s IP address,
user can connect to the CSE-M32 by the host name (after DNS looking up.) The DDNS
service provider that the CSE-M32 supports is only Dyndns (http://www.dyndns.com)
currently.
4.6.2
TCP/UDP
In addition, CSE-M32 can transmit some information to user‟s TCP/UDP servers each
period which is set. This information is IP address, MAC address, product ID, firmware
version, and comment. The data can be sent as either ASCII or Hexadecimal type.
For more details about the Notify IP Change, please refer to the document on our web site.
For more details about the ezManager, please refer to the manual of ezManager on our
web site.
