Solinst Remote Radio Link, Руководство пользователя, Страница: 5 / 52

Remote Radio Link User Guide
Page 1
1 Introduction
Solinst Telemetry Systems provide an economical and efficient method to access remote data instantly. They
provide communication between field located dataloggers and a Home Station computer.
Solinst Telemetry Systems are designed specifically for the high quality Solinst dataloggers. Up to four Solinst
dataloggers can be connected to one Remote Station, in any combination of the Levelogger Edge, Barologger
Edge, Levelogger Junior Edge, LTC Levelogger Edge, Rainlogger Edge, LevelVent, AquaVent, Levelogger
Gold, Barologger Gold, Levelogger Junior, LTC Levelogger Junior and Rainlogger. (See Levelogger or Vented
Datalogger User Guides for more information on each datalogger).
Systems operate on two basic schedules. A linear “Sample Rate” is set, at which a Remote Station records a
real-time reading from each attached datalogger. A “Report Rate” is set to establish the frequency that the data
is sent from a Remote Station to the Home Station PC. Optionally, dataloggers themselves can be set up to
record and store data independently of the Telemetry System. This provides a reliable back-up if circumstances
require it.
This manual focuses on configuration, programming, and installation of Remote Radio Link (RRL) Systems. It
also discusses the various options to power the Systems. It includes instructions for installing and using Solinst
Telemetry Software to set up data collection schedules, manage data, and perform remote diagnostic checks.
Note:
You can bridge an RRL Network with an STS Edge Telemetry System (which uses cellular communication). See
the STS Edge User Guide for more details.
Figure 1-1 RRL System