Solinst Remote Radio Link, Руководство пользователя, Страница: 21 / 52

Remote Radio Link User Guide
Page 17
4.2.1 Editing Datalogger Information
The Datalogger Information window includes Datalogger Serial Number, Well Location, Altitude and Density
Adjustment (Levelogger Gold models only), Sample Rate, and Memory Mode Selection.
If you do not require independent logging, select and the RRL Station will only collect a real-time reading
from the datalogger at the scheduled Sample Rate. There is no need to enter a Sample Rate.
If you want your datalogger to record and store readings in its internal memory, independent of RRL operation,
fill in the Sample Rate and Memory Mode Selection fields, and select if independent logging has been
stopped.
• Serial Number: Your datalogger Serial Number will display after the System is started.
• Well Location : Input specific site / location information.
• Density Adjustment: (Levelogger Gold models only) Is used to adjust the range of the datalogger
based on the sample fluid density. The range for the density adjustment is from 0.9 kg/L to
1.1 kg/L. Uncheck the Density Adjustment field to disable the Density Adjustment function.
• Altitude: (Levelogger Gold models only) In feet or meters above sea level, at which the logger
is actually deployed, is input in the altitude field. Water column equivalent pressure decreases
with altitude at a rate of approximately 1.2:1000 in the lower atmosphere below 5000 m. You can
compensate for this by entering an elevation between -1000 ft below sea level and 16,400 ft
(or -300 m and 5000 m) above sea level. The readings will then be automatically compensated for
elevation.
Note:
The Levelogger Edge, Levelogger Junior Edge, LTC Levelogger Edge and Barologger Edge can be adjusted for
Altitude and Density post data collection using the Data Compensation Wizard in the Levelogger Software.
Figure 4-9 Datalogger Information Window