Solinst Remote Radio Link, Руководство пользователя, Страница: 18 / 52

Remote Radio Link User Guide
Page 14
Step 3: Configuration Progress
Figure 4-5 RRL Software Wizard Transition Screen
Step 3 is a transition screen. At this point you should connect the RRL Station you are about to program to
the Home Station computer using an RS232 cable (#106811). This screen will identify that you are about to
program the Home Station, a Relay Station or Remote Station. Programming the Home Station is always first.
This screen will show you your progress in configuring your RRL Network. It will indicate which RRL Stations
have been programmed and which RRL Stations are left to program.
Note:
It is recommended you connect your dataloggers to each RRL Station before programming.
Figure 4-6 RRL Station Connected to a PC
#106811