Solidyne UNIDEX UX24, Руководство пользователя

Страница: 12 / 48

2.4.3 RJ45 inputs and outputs
The following table shows the color nomenclature
and standard pin numbering of an RJ45 connector.
NOTE
The "SOL-M12 /minijack" adapters (a 1/8 female TRS)
can be connected to balanced or unbalanced outputs. It
is not recommended to unbalance inputs, since leaves
the (-) signal unconnected they can introduce noise.
The "SOL-M12 /RCAM" adapters (to RCA male) can be
connected to balanced INPUTS to unbalance them,
since they connect the balanced (-) signal to ground. DO
NOT USE ON BALANCED OUTPUTS.
BALANCED INPUTS / OUTPUTS
PIN WIRE COLOR
1 Left channel (+)
2 Left channel (-)
3 Right channel (+)
4 Ground
5 Reserved
6 Right channel (-)
7 -15 (option)
8 +15 (option)
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
UNBALANCED INPUTS / OUTPUTS
PIN WIRE COLOR
1 Left channel (+)
2 NC
3 Right channel (+)
4 Ground
5 Reserved
6 NC
7 -15 (option)
8 +15 (option)
Orange/White
Orange
Verde/White
Blue
Blue/White
Green
Brown/White
Brown
2.4.4 Solidyne UX24 wiring kits
All RJ45 adaptation sections (male or female) to
standard audio connectors can be ordered from the
factory. Check the complete list of cables in the fol-
lowing link:
http://www.solidynepro.com/consola-de-audio-de-
bc-accesorios-y-cables/
Next figures details the connections between RJ45
and common audio connectors:
2.4.4.1 To RCA (unbalanced)
2.4.4.2 To balanced XLR
2.4.4.3 To balanced TRS
2.5 USB installation
NOTE
The following description refers to on-board USB. To
install an external adapter UDX USB please see 2.11 –
UNIDEX external adapters
The USB connection requires a computer with
Windows © 10. Provides four stereo playback de-
vices and four stereo recording devices. Requires
the installation of a compatible ASIO driver. Fol-
low the next steps:
1.
Connect the USB port of UX24 to a USB port
of the computer, using the USB A-B cable sup-
plied with the console.
2.
Download the driver from the following link:
ht tp://solidynePRO.com/DW/Solidyne_UsbAu -
dio.zip
3.
Run the setup and follows the instructions.
Once the USB driver is installed, Windows shows
four Solidyne USB output devices, and four Soli-
dyne USB input devices, as shown in the following
image.
USB output devices; in the console correspond to
the inputs: USB-1; USB-2; USB-3 and USB-4.
The USB input devices (Solidyne USB-IN) corre-
spond in the console with the outputs: USB-1 to
USB-4, which can be assigned to any of the buses
(PGM, REC, AUX and VBUS), among other possi-
ble signs.
Page 12 Solidyne UNIDEX UX24 www.SolidynePro.com