DMS-1200 Release 6 Operations Manual
Section 4 – DMS-1200 Setup
38
4.10.3 Set the SNMP v3 User and Trap Session
SNMP v3 provides secure access to devices by authenticating and encrypting packets over the
network. To support SNMP v3, first configure user and trap session information.
1. On the
Network
menu, click
NOC Setup.
2. In the
SNMP v3 User & Trap Session
section of the Setup screen, edit the settings
according to these guidelines.
Option
Action / Status
Type
Define access authority: Read-only or Read-write. This field is
mandatory.
User
Enter a User name. This field is mandatory.
Security
Enter Security Level: None = no authentication required. No Privacy
= authentication. Privacy = Authenti encryption.
Authentication Protocol
If security level is No Privacy or Privacy, select the authentication
protocol and enter password. The minimum password length is eight
characters.
Privacy Protocol
If security level is Privacy, select the privacy protocol and enter
password. The minimum password length is eight characters.
Table 4.8 – SNMP v3 User Settings
