Solid State Logic Matrix2 Delta Скачать руководство пользователя страница 98

Страница: 98 / 180

Utility Buttons

"# #

The

BANK

cursors cycle through the tracks in the DAW session 16 at a time. The

CHANNEL

cursors cycle through the tracks in the DAW session one at a time.

#,# & *

ARRANGE WINDOW

ARRANGE

%$ E

!4#& * *%# #!4

# !4# & *

SHIFT

CTRL

OPT/ALL

and

๏

/ALT

) as well as the

ESC

and

ENTER

keys

! `@@

to these buttons there are two further utility buttons,

SAVE

and

UNDO

, located to the right of

the main session counter. These simply replicate the DAW Save and Undo functions.

\ [\&Z; [

in Appendix A <"[ G

Navigation Controls

Matrix’s navigation controls can be used to navigate around the DAW session and to enable additional

transport monitoring functions such as Scrub and Shuttle (HUI only). They consist of the large navigation

# #

buttons above them known as Cursor keys, comprising four directional keys and a central

MODE

selector.

The navigation wheel performs a number of different functions, depending on which mode has been

selected using the four mode buttons above the wheel.

For DAW’s controlled via the MCU protocol, the default mode of operation for the wheel is to

scroll the timeline through the session.

JOG

mode selects the MCU

SCRUB

mode to audibly

monitor tracks by ‘scrubbing’ them in the timeline.

TRACKS

re-assigns the wheel to scroll the

Matrix faders through all the tracks in the session. It is provided as an alternative to the utility

BANK

and

CHANNEL

keys (see above).

SHUTTLE

and

NUDGE

are not supported.

When controlling Pro Tools, with no Mode selected, the Wheel will also scroll through the session timeline with a resolution

and speed derived from the Timeline display format in use. Selecting

NUDGE

allows timeline control using the current ‘nudge’

value and can also be used to nudge a selected clip(s).

JOG

and

SHUTTLE

engage the corresponding Pro Tools functions as

detailed in the Pro Tools Control Surfaces manual. However please note that a number of Pro Tools functions are disabled when

either

JOG

SHUTTLE

are active. To exit a mode, either deselect the function or press the transport Stop key.

TRACKS

re-assigns the wheel to scroll the Matrix faders through all the tracks in the session. It is provided as an alternative to the utility

BANK

and

CHANNEL

keys.

\;<"

MODE

key located in the centre of

the Cursor key group. Note that

MODE

function is a single level control in the MCU protocol and has two levels of operation

in the HUI protocol, indicated by the

MODE

Chapter 5 - DAW Control

Matrix

Owner’s Manual

Содержание Matrix2 Delta





















































































































































































Результаты поиска

Содержание Matrix2 Delta

Отзывы:

Solid State Logic Matrix2 Delta, Руководство пользователя, Страница: 98 / 180

Результаты поиска

Содержание Matrix2 Delta

Отзывы: