Solid State Logic Matrix2 Delta Скачать руководство пользователя страница 89

Страница: 89 / 180

‘

Andy Vocal 1

’ is greyed out because at least one of the devices in that particular chain is already in use elsewhere in the Insert

Matrix. The right-hand column shows that the device in question is the

DBX 1

and it is being used on Channel 14. Right-click on

the chain name in the left-hand column and choose

Release Assigned Devices

. This will un-route any devices needed by that

particular chain and make them available again. The chain name will no longer be greyed out. Click and drag on the chain name

itself (left-hand column) and move into the desired channel on the Insert Matrix.

' #0 *

Renaming and Deleting Chains

Right-clicking on the chain name will allow it to be renamed or deleted. A maximum of 32 preset chains can be stored.

Save and Load Entire Insert Matrix as a Preset

The

Save Preset

and

Load Preset

buttons at the top-right of the Insert Matrix tab allow entire Insert Matrix settings (including

assigned devices, device names, chains and devices set as stereo) to be saved and loaded within each title.

This may be useful if you have a particular setup for tracking and a different setup for mixing. Instead of having to re-create these

setups each time you open a New Title, you can simply save them as two presets.

Clicking the

Save Preset

button will bring up a pop-up window. Type in

a name for this preset into the blank box at the bottom of the window

and click

Save

Upon creating a New Title, the preset will be available in a drop-down

list. Or, if you create a New Title with a default Insert Matrix and then

realise you want to use one of the presets, simply go to the Insert matrix

Tab and click

Load Preset

, choose your preset name from the list and

click

Load

RENAMING AND DELETING SAVED CHANNEL NAME PRESETS

Right-clicking on a stored channel preset in the list allows it to be renamed or deleted. You can rename or delete from either

the

Load

Save

pop-up window. The maximum amount of saved presets is 32.

Chapter 4 - Matrix Remote

Matrix

Owner’s Manual

Содержание Matrix2 Delta





















































































































































































Результаты поиска

Содержание Matrix2 Delta

Отзывы:

Solid State Logic Matrix2 Delta, Руководство пользователя, Страница: 89 / 180

Результаты поиска

Содержание Matrix2 Delta

Отзывы: