Solid State Logic Matrix2 Delta Скачать руководство пользователя страница 70

Страница: 70 / 180

Now you are ready to engage A-FADA. Press the

SSL

button on the Matrix and then press the

Auto

button. This example

presumes you want your DAW on DAW layer 1 to control Matrix’s channels. Simply press the

DF1

button and your DAW

faders now control Matrix’s analogue gains.

@ <"#<">

DF2

button instead.

>5F 5F7B?<&%B

>J #@Q?%QA@5A

The Snap function

\ "!j"<"

(when you press the

button). When A-FADA mode is enabled, the console faders will move to match the current DAW fader

positions. Pressing the

Snap

switch will move the faders back to the previously stored positions, allowing the analogue balance

to be restored and written into the DAW automation.

Operating A-FADA

Once A-FADA mode has been enabled, the console faders will control the corresponding DAW faders, and the fader position

signal from the DAW will control the console fader positions and analogue gain, regardless of the selected Focus mode.

In Analogue Focus the channel cut switches control the analogue cuts directly, while in DAW Focus they are routed via the

DAW and will be recorded as mute automation. Analogue Focus mode allows channels to be muted as far as monitoring the mix

is concerned, without writing mute automation or needing to change automation modes.

The console solo switches are connected to the analogue signal path in both Focus modes.

In order to lock console channels to the same DAW track (and thus its automation), Channel/Bank scrolling is disabled in

A-FADA mode.

Extra Setup Information for using A-FADA with Logic

You need to ensure that Logic’s Control Surfaces Preferences are set correctly. Go to

Preferences > Control Surfaces

Ensure that the options ‘

Touching Fader Selects Track

’, ‘

Control surface follows track selection

’ and ‘

Flash Mute

and Solo buttons’

are all un-ticked.

@ & "{#\ | {

correspond to Matrix’s 16 analogue channels. If using Instrument tracks with Multi Outputs, also ensure that the ‘Link’ button is

disabled, to prevent Logic automatically switching back to ‘All’ view mode when you click on an instrument.

,#"'"2!@A%<',#@% $ R #A

!4 2 * #!4( "2!!4-

# $ &% N* #

*##,#

Chapter 3 - Analogue Signal Flow

Matrix

Owner’s Manual

Содержание Matrix2 Delta





















































































































































































Результаты поиска

Содержание Matrix2 Delta

Отзывы:

Solid State Logic Matrix2 Delta, Руководство пользователя, Страница: 70 / 180

Результаты поиска

Содержание Matrix2 Delta

Отзывы: