manualshive.com logo in svg

Solid State Logic AWS 900+, Руководство пользователя


Поделиться
Скачать
background image

www.solid-state-logic.com

Solid State Logic

International HQ:  Begbroke, Oxford, England OX5 1RU · Tel +44 (0)1865 842300 · Email [email protected]
France: 7 bis de la Victoire, 93150 Le Blanc Mesnil, France · Tel +33 (0)1 48 67 84 85 · Email [email protected]
Italy: Via Timavo 34, 20124 Milano, Italy · Tel +39 0392 328094 · Email [email protected]
New York: 320 West 46th Street, New York, NY 10036 · Tel +1 212 315 1111 · Email [email protected]
Los Angeles: 5757 Wilshire Boulevard Suite 401, LA, CA 90036 · Tel +1 323 549 9090 · Email [email protected]
Japan: 3-55-14 Sendagaya, Shibuya-Ku, Tokyo 151-0051 · Tel +81 (0)3 5474 1144 · Email [email protected]

© 2008 by Solid State Logic. All Rights reserved under International and Pan-American Copyright Conventions. S

So

olliid

d  S

Stta

atte

e  L

Lo

og

giicc and S

SS

SL

L are trademarks of Solid State Logic. 

All other trademarks are the property of their respective owners. No part of this publication may be reproduced in any form or by any means, whether mechanical or electronic,
without the written permission of Solid State Logic, Oxford, England. Solid State Logic has a policy of continual product enhancement and reserves the right to alter
specifications without notice. E&OE. 01.04.08

AWS 900+. 

This is SSL.

Feature Summary

• Integrated console, signal acquisition, signal processing, studio

monitoring, bass management and DAW control

• Advanced DAW control through a High Resolution integrated

TFT screen

• Small elegant design frame with desk installation or

freestanding options

• Innovative new large fader dual-control of both DAW and console

input path with follow fader metering

Exceptional Signal Processing

• Legendary SSL sound quality
• Identical SuperAnalogue™ technology to SSL’s flagship XL

9000 K Series console

• DC Coupled for excellent low frequency response
• Balanced signal paths throughout for optimal dynamic range
• Greater bandwidth than 192kHz recorders
• 24 Ultra low-noise dual impedance mic amps
• 24 channels with Twin curve SSL E and G Series 4-band

parametric equalisation

• Assignable dynamics sections with gate, expander and

compressor/limiter

• G Series stereo mix buss compressor 
• Flexible processing order

Creative Flexibility

• Dual mix bus design for comprehensive control of Input and DAW

mixing and monitoring

• 5.1, stereo or stereo down-mix main outputs
• 8 Track busses
• Two main busses Record and Mix
• EFX re-assign system on all 24 channel modules
• Wide range of solo modes including Solo in Front
• 4 stereo echo returns
• Unrivalled comprehensive studio monitoring section
• Hi-visibility channel meters, 4 main VU meters and complete

busses metering in the centre section

The AWS 900+ is a complete, compact SSL console, with all of the audio quality, robustness and advanced ergonomics that this implies. AWS
900+ offers no-compromise audio performance, equivalent to SSL’s celebrated XL 9000 K Series mixing console which is a feature of major
studios the world over. Signal routing, inputs/outputs, monitoring and signal processing are all permanently available on the console.
Quality motorised faders provide conventional audio level control as well as controlling the recording and replay levels in your DAW.

AWS 900+ Analogue Workstation System

Содержание AWS 900+



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для AWS 900+

EarthQuake 5040 Operator'S Manual preview
5040
Бренд: EarthQuake Страницы: 28
TAIKO Audio Extreme Manual preview
Extreme
Бренд: TAIKO Audio Страницы: 24
Ultimaker S7 Installation And User Manual preview
S7
Бренд: Ultimaker Страницы: 38
A&D UP-200 User Manual preview
UP-200
Бренд: A&D Страницы: 2
A&D RA3100 Omniace Instruction Manual preview
RA3100 Omniace
Бренд: A&D Страницы: 176
Paia 4712 Assembly And Using Manual preview
4712
Бренд: Paia Страницы: 11
CAB 4414 Series Service Manual preview
4414 Series
Бренд: CAB Страницы: 39
CAB FM1 Instruction Manual preview
FM1
Бренд: CAB Страницы: 27
EASTERN INSTRUMENTS CentriFlow Manual preview
CentriFlow
Бренд: EASTERN INSTRUMENTS Страницы: 93
EarthQuake 9800B Operating & Parts Manual preview
9800B
Бренд: EarthQuake Страницы: 12
Pari Vortex Instructions For Use preview
Vortex
Бренд: Pari Страницы: 2
Garmin TR-1 Gold Owner Handheld Quick Reference preview
TR-1 Gold
Бренд: Garmin Страницы: 2
Garmin PORTABLE ICE FISHING KIT Installation Instructions preview
PORTABLE ICE FISHING KIT
Бренд: Garmin Страницы: 5
Garelick 71095 Mounting And Operating Instructions preview
71095
Бренд: Garelick Страницы: 4
VBM POCKET Instructions For Use Manual preview
POCKET
Бренд: VBM Страницы: 36
W&H Med Lara Instructions For Use Manual preview
Lara
Бренд: W&H Med Страницы: 122
K-LASER Blue Derma Operating Instruction preview
Blue Derma
Бренд: K-LASER Страницы: 70
K-LASER Blue Dental Operating Instruction preview
Blue Dental
Бренд: K-LASER Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды