9
B74/R72
FITNESS
BIKE
3
HANDLE
BAR
1.
Feed the computer cable
(80)
through the console mast and out the top.
Secure the console mast
(2)
to the mating plate of the main frame with the four
5/16” X 3/4” bolts
(32)
, 5/16” split washers
(35)
and 5/16” flat washers
(33)
. Use
the Allen wrench provided
(87)
to tighten the bolts securely. Be very careful not
to pinch the computer cable between the two plates of the console mast!
2.
Install the two covers
(60 & 69)
onto the base of the console mast with the
three 4mm screws
(36)
.
4
PLASTIC
PARTS
1.
Hold the handle bar
(3)
while feeding the hand pulse wires into the opening in
the handle bar mounting plate and out of the same hole as the computer cable.
Secure the handle bar to the console mast with the two 5/16” X 5/8” bolts
(104)
, 5/16” split washers
(35)
and 5/16” flat washers
(33)
. Be very careful not
to pinch the hand pulse wires between the handle bar and console mast!
2.
Plug the computer cable and hand pulse cables into the back of the console.
Place the console on the mounting plate while storing any excess wire into the
console mast. Secure the console with four 5mm X 12mm screws
(41)
. Make
sure you do not pinch the wires between the console and the mounting plate!
3.
Snap the handle bar cover
(101)
onto the back of the handle bar.
HARDWARE
STEP3
#36
.
4mm × 12mm
Sheet Metal Screw
(3 pcs)
#32
.
5/16" × 3/4"
Socket Head Cap Bolt
(4 pcs)
#33
5/16" Flat Washer
(4 pcs)
#35
.
5/16” Split Washer
(4 pcs)
※
Screws 32, 33, 35
are already on the
mainframe
HARDWARE
STEP4
#104
.
5/16" × 5/8"
Button Head Socket
Bolt (2 pcs)
#35
.
5/16” Split Washer
(2 pcs)
#33
.
5/16" Flat Washer
(2 pcs)
#41
.
5mm × 12mm
Phillips Head Screw
(4 pcs)
This screw is already
on the mainframe.
