B74/R72
FITNESS
BIKE
8
1
REAR
STABILIZER
1.
Secure the front and rear stabilizers
(4&5)
to the main frame with the four 3/8”
X 3-1/2” carriage bolts
(23)
, four 3/8” curved washers
(24)
and four 3/8” cap
nuts
(30)
. Using the 14/15mm wrench provided
(106)
tighten the cap nuts
securely.
2
CONSOLE
MAST
1.
Remove the M8 nuts and 8mm washers (A) from the threaded studs on the
underside of the seat. Assemble the seat to the sliding seat mount and fix it with
the previously removed nuts and washers. Use the wrench provided
(106)
to
tighten the nuts securely.
2.
Install the 3/8” X 1-1/2” carriage bolt
(71)
through the square hole in the seat
slide and mount the seat assembly on the seat tube
(6)
. Secure in place using
the 3/8” flat washer
(72)
and the seat adjustment knob
(52)
.
3.
Install the left and right pedals. The left pedal is a reverse thread and will screw
into the crank in a counter-clockwise direction. Make sure the pedals are
tightened very securely. The pedals may need to be retightened after a few
hours of use.
HARDWARE
STEP 1
#23
.
3/8" × 3-1/2"
Carriage Bolt (4 pcs)
#24
.
3/8" Curved
Washer (4 pcs)
#30
.
3/8" Cap Nut
(4 pcs)
HARDWARE
STEP2
#71
.
3/8" × 1-1/2"_
Carriage Bolt (1 pc)
#72
.
Ø3/8" _ Flat
Washer (1 pc)