Safety precautions and
instructions
Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · [email protected]
8
Marine diesel engines. Operator’s manual
Engine labels
If the engine does not start after several attempts to crank
may cause water entering the engine. In this situation it is
recommended:
1)
Close the seacock.
2)
Drain the water from the exhaust system in the water
trap.
3)
Do not try to restart the engine until the cause of the
start fail is identified.
The engine and the gearbox are supplied without any fluid inside.
Consult the manual to follow the installation procedure and
commissioning as well as the fluid capacity - coolant, oil and oil of
gearbox
Read the engine operator's manual and understand it before any
operation and maintenance of the engine, to ensure that it
continues operating practices and maintenance procedures
insurance.
Dangerous voltage. Operate the engine only when all guards
and electrical panels are ready.
Hot parts, coolant and steam. Stop the engine and let it cool
down before touching or removing any engine part.
Moving parts. Keep hands, feet, hair, clothing and test leads
away from the belts and pulleys when the engine is running.
Replace guards, screens and covers before operating the
engine.
Heavy Material. Engine is a heavy element, use the right tools
for transportation and handling.
Do not use the motor as a step. Use it as a step can cause engine damage plus cause undesired
operation.
Connection point of the battery cables to the engine. Red cable (positive)
and black cable (negative).
Engine exhaust line installation label, above and below the waterline. See 5.7. Intake and
exhaust system.
