1 kW
≅
1,36 CV 1 kW
≅
1,36 HP (metric) 1 kW
≅
1,36 CH
44595
Max. Intermittent inclination in operation (º):
30
* The sea water pump flow has been obtained under zero aspiration height conditions. Besides, depending on the arrangement of the
complete system (hoses, elbows, suction heads, etc. ) this value can be lower.
** The diameter system will be calculated depending on each installation in case of a dry exhaust
Total length (mm):
1146
Total width (mm):
690
Total height (mm):
974
Down Angle (º):
10
Installation data / Dimensions
Sea water hose inner diameter (mm):
42
Fuel feeding hose inner diameter (mm):
12
Fuel return hose inner diameter (mm):
12
Exhaust hose inner diameter (mm):
125**
Thermostat valve completely opened (ºC):
95
Maximum sea water temperature (ºC):
32
Heat to be extracted at 100 % load (kcal/h):
147034,35
Engine ratio/coolant pump RPM:
0,82
Coolant pump flow at maximum RPM (l/min):
170
Sea water pump flow at maximum RPM (l/min):
161,2 *
Maximum suction head of sea water (m):
2,5
Thermostat valve starts opening (ºC):
83
Total circuit capacity (l):
23
Oil pressure switch (kg/cm2):
0,3
Cooling system
Coolant type:
-
Volume capacity of coolant circuit (l):
23
Minimum pressure at idle (kg/cm2):
0,8
Oil type:
SAE 15W40
Maixmum oil temperature (ºC):
130
Oil pan capacity (l):
22,5
Lubrication system
Lubrication type:
Forced circulation
Oil consumption at full load (g/kWh):
7,02
Minimum pressure at maximum RPM (kg/cm2):
0,8
Maximum pressure at maximum RPM (kg/cm2):
4,5
Idle Consumption (g/kWh):
220
Consumption at 50 % (g/kWh):
218
Consumption At 75 % (g/kWh):
207,5
Consumption at 100 % (g/kWh):
208
Injection Pressure (bar):
275
Maximum static head of return pipe (bar):
0,5
Firing order:
1-5-3-6-2-4
Injection timing (º):
N/A Before TDC
Fuel standards:
Fueloil diesel ASTM
Injection pump type:
Individual
Maximum suction head (m):
1,3
Governor type:
Electronical
Battery Cable Length (m):
5 m
Battery Cable Section (mm2):
70 mm2
Fuel system
Fuel type:
Diesel
Injection system:
Mechanical and indirect
Electrical system
Voltage (V):
24
Alternator (A):
55
Minimum Battery Capacity (Ah):
99
Engine shut off system:
ETS
Rotation (viewed from flywheel side):
Counterclockwise
Idle RPM:
750 (±50)
Intake system:
Turbocharged with intercooler
Starting aid:
Supercharger
Compression ratio:
17.5:1
Continuous power (kW):
129
Intermittent Power (kW):
143
Max RPM:
1600
Layout of cylinders:
In line
Cylinder diameter (mm):
108
Stroke (mm):
130
Total displacement (cc):
7146
SDZ-280R
Specifications
No. Of Strokes:
4
Number of cylinders:
6
