1 kW
≅
1,36 CV 1 kW
≅
1,36 HP (metric) 1 kW
≅
1,36 CH
44529
Max. Intermittent inclination in operation (º):
30
* The sea water pump flow has been obtained under zero aspiration height conditions. Besides, depending on the arrangement of the
complete system (hoses, elbows, suction heads, etc. ) this value can be lower.
** The diameter system will be calculated depending on each installation in case of a dry exhaust
Total length (mm):
862
Total width (mm):
665
Total height (mm):
935
Down Angle (RO):
10
Installation data / Dimensions
Sea water hose inner diameter (mm):
42
Fuel feeding hose inner diameter (mm):
12
Fuel return hose inner diameter (mm):
12
Exhaust hose inner diameter (mm):
90**
Thermostat valve completely opened (ºC):
95
Maximum sea water temperature (ºC):
32
Heat to be extracted at 100 % load (kcal/h):
86844,85
Engine ratio/coolant pump RPM:
0,82
Coolant pump flow at maximum RPM (l/min):
170
Sea water pump flow at maximum RPM (l/min):
161,2 *
Maximum suction head of sea water (m):
2,5
Thermostat valve starts opening (ºC):
83
Total circuit capacity (l):
14
Oil pressure switch (kg/cm2):
0,3
Cooling system
Coolant type:
Organic 50%, -38ºC
Volume capacity of coolant circuit (l):
17,5
Minimum pressure at idle (kg/cm2):
0,3
Oil type:
SAE 15W40
Maixmum oil temperature (ºC):
120
Oil pan capacity (l):
13
Lubrication system
Lubrication type:
Forced circulation
Oil consumption at full load (g/kWh):
6,35
Minimum pressure at maximum RPM (kg/cm2):
0,8
Maximum pressure at maximum RPM (kg/cm2):
4,5
Idle Consumption (g/kWh):
211
Consumption at 50 % (g/kWh):
212
Consumption At 75 % (g/kWh):
203
Consumption at 100 % (g/kWh):
211,52
Injection Pressure (bar):
275
Maximum static head of return pipe (bar):
0,5
Firing order:
1-3-4-2
Injection timing (º):
N/A Before TDC
Fuel standards:
Fueloil diesel ASTM
Injection pump type:
Individual
Maximum suction head (m):
1,3
Governor type:
Mechanical
Battery Cable Length (m):
5 m
Battery Cable Section (mm2):
50 mm2
Fuel system
Fuel type:
Diesel
Injection system:
Mechanical and direct
Electrical system
Voltage (V):
24
Alternator (A):
55
Minimum Battery Capacity (Ah):
99
Engine shut off system:
ETS
Compression ratio:
17,5:1
Continuous power (kW):
106,2
Intermittent Power (kW):
118
Max RPM:
2300
Layout of cylinders:
In line
Cylinder diameter (mm):
108
Stroke (mm):
130
Total displacement (cc):
4764
SDZ-165
Specifications
No. Of Strokes:
4
Number of cylinders:
4
Rotation (viewed from flywheel side):
Counterclockwise
Idle RPM:
750 (±50)
Intake system:
Turbocharged
Starting aid:
Fuel supercharged
