Transport, handling and storage
Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · [email protected]
10
Marine Diesel gensets. Operator’s Manual.
Restrictions
Coverage:
a)
To validate the warranty is necessary fill and send the inspection prior to the delivery of
propulsion engines or genset to Solé Diesel through an official installer. See SECTION 13.
b)
The warranty covers any failure of the product under normal opera- ting conditions caused by
a defect in manufacturing.
c)
The warranty covers the labour costs necessary to replace and/or repair the defective original
components, according to Solé Diesel standards of excellence. The time period covered for
these operations is limited to 4 hours.
d)
The warranty covers reasonable costs of travel required to carry out the necessary operations.
The travel distance is limited to 300 kilometres in conjunction to a travel time of 3 hours.
Excluded from coverage:
a)
If Solé Diesel products are installed and used alongside other products not designed or
manufactured by Solé Diesel that affect their operation, the warranty shall apply exclusively
to the Solé Diesel products and shall not apply if the products from another manufacturer are
inappropriate for use alongside Solé Diesel products or are the cause of the failure or poor
operation of our products.
b)
The warranty doesn’t will be effective if don't filled correctly and send the inspection prior to
the delivery of propulsion engines and genset to Solé through an official installer. SECTION
13.
c)
The warranty shall not apply if the revisions and maintenance services indicated in the User
and Maintenance Manuals have not been adhered to properly. In case of implemented
warranty, supporting document of the revisions and maintenance service should be exhibited,
proving the requirements outlined in the manuals have been followed.
d)
Deterioration resulting from time of storage exceeding 6 months and/or storage conditions
that do not comply with the procedures described in the User and Maintenance Manuals.
e)
Deterioration resulting from not complying with the procedure for winter storage while the
engine is not in service, as described in the User and Maintenance Manuals.
f)
Faults due to negligence, lack of service, accidents, abnormal use and inadequate service or
installation.
g)
Faults due to the use of components not manufactured or sold by Solé Diesel.
h)
Faults due to electrical installations that do not comply with Solé Diesel design specifications
or are not expressly approved by Solé Diesel.
i)
Faults due to the use of and operation with fuels, oils or lubricants that are not authorised by
Solé Diesel.
j)
Faults due to water entering the cylinder(s) through the exhaust system.
k)
Faults in propulsion engines due to the use of a propeller that is inadequate for the load or
application. We recommend contacting Solé Diesel to consult the choice of the correct
propeller(s).
l)
Failure for general omission of the procedures described in the User and Maintenance
Manuals.
m)
Components subjected to normal operating wear and tear.
n)
n) Costs due to phone communications, loss of time or money, discomfort, launching,
grounding, removal or replacement of vessel parts or materials because the design of the
vessel makes it necessary to do so to access the engine, and damage and/or accidents
caused as a result of a failure.
