2 • Table of Contents
________________________________________________________________________________________________
1.
TABLE OF CONTENTS
1.
Table of Contents .................................................................................................................. 2
2.
Introduction ............................................................................................................................ 3
3.
Wiring Diagram ...................................................................................................................... 5
4.
Terminals Review .................................................................................................................. 6
5.
Front Panel Description ........................................................................................................ 8
6.
Mode Pages Display .............................................................................................................. 9
6.1
Parameter Setting
–
Temperature Settings ............................................................................ 10
6.2
Parameter Setting
–
I/O Settings ............................................................................................ 12
6.3
Parameter Setting
–
Tripping and Alarm Options ................................................................... 14
6.4
Actual Data ............................................................................................................................ 17
6.5
Statistical Data ....................................................................................................................... 18
6.6
Service Mode ......................................................................................................................... 19
7.
Resistance/Temperature Conversion Table Pt. 100 as per Din 43760.............................. 20
8.
Dip switches Settings for PT100/Thermistor Inputs Designation ..................................... 20
8.1
Dismantling the Main PCB and the Input PCB ....................................................................... 21
9.
Tripping / Alarm Default Settings ....................................................................................... 22
10.
Flash Messages .................................................................................................................. 23
11.
TPR-6 Communication ........................................................................................................ 24
12.
Technical Specifications ..................................................................................................... 25
13.
Dimensions and Cut-Out Dimensions ................................................................................ 26
14.
Ordering Information ........................................................................................................... 27
15.
Notes .................................................................................................................................... 28
Safety notes
Read this manual carefully before operating the equipment and follow its
instructions.
Installation, operation and maintenance should be in strict accordance with this
manual, national codes and good practice. Installation or operation not performed
in strict accordance with these instructions will void manufacturer’s warranty.
Disconnect all power inputs before servicing the relay.
For use in a pollution degree 2 environment or equivalent.
This device is not intended to provide motor overload protection, and suitable
protection should be provided in the end product.
DANGER
- Electrocution Hazard - RTDs or other sensors connected to this
device must be provided with electrical isolation sufficient for the voltage present
on the motor windings (or other equipment being monitored). Sensors must also
be provided with shielded cables, and all shields must be reliably grounded.
The company reserves the right to make any improvements or modifications to its
products without prior notice
.
