1.1 Scope of Validity
This manual is an integral part of X3-Retro Fit, It describes the assembly,
installation, commissioning, maintenance and failure of the product. Please read it
carefully before operating.
Note:
“8.0”
means 8.0kW.
“E”
means “EPS function” will be available with an external changeover
device installed.
“C “
means without”EPS function”.
Store this manual where it can be accessible at all times.
1.2 Target Group
This manual is for qualified electricians. The tasks described in this manual only
can be performed by qualified electricians.
1.3 Symbols Used
The following types of safety instructions and general information appear in this
document as described below:
1. Notes on this Manual
Notes on this Manual
Contents
Note
！
“Note” provides tips that are valuable for the optimal operation of
our product.
Warning!
“Warning” indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
03
8. Setting
8.1 Control Panel
8.2 Menu Structure
8.3 LCD Operation
9. Troubleshooting
9.1 Troubleshooting
9.2 Routine Maintenance
10. Decommissioning
Dismantling the Inverter
10.1
Packaging
10.2
Storage and Transportation
10.3
47
47
48
49
6.5 Earth Connection(mandatory)
6.6 Meter Connection
6.7 RS485Connection
6.8 DRM Connection
6.9 LAN Connection
6.10 WiFi Connection(optional)
6.11 Inverter Operation
35
36
38
39
40
41
42
7. Firmware Upgrading
44
72
72
76
77
77
77
77
02
Danger
！
“Danger” indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
Caution
！
“Caution” indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
X3-Fit-10.0E
X3-Fit-8.0E
X3-Fit-10.0C
X3-Fit-8.0C
