Firmware Upgrading
46
47
8. Setting
8.1 Control Panel
A
B
C
D
E
F
G
H
Indicator
LED
Function
Button
Down button: Move up or decrease. the value
ESC button: Return from current interface or function.
OK button: Confirm the selection.
Up button: Move up or increase the value.
LCD
Screen
Display the information of the inverter.
Object
A
B
C
D
E
F
Description
G
H
Name
Constant blue: The inverter is in normal status or in EPS mode.
Flashing blue: The inverter is in waiting or checking status.
Off: The inverter is in fault status.
Constant green: The battery communication is working.
Flashing green: The battery communication is normal and in
idle status.
Off: The battery does not communicate with inverter.
Constant red: The inverter is in fault status.
Off: The inverter has no errors.
Setting
Step4.
After the upgrade is finished, the LCD will display “succeed”(only for DSP
upgrades), please remember to pull off the U-disk, screw the waterproof lid and
press the “Esc” to return to the Main interface. Then press and hold the “Enter”
key to exit Off Mode.
Warning!
If the upgrading is broken off during operation, please ensure the inverter
is steadily powered on and reinsert the U-disk.
