●
Status
The status function contains five items of the inverter(grid, charger, charger-
setting, eps and Load).Press up and down to select and press “OK” to confirm the
selection, press “ESC” to return to Menu.
a) Grid
This status shows the current grid condition such as voltage, current, output
power, the local consumed power and frequency.
Pout measures the output of inverter;
Pgrid measures the power exported to or imported from grid.
Positive value means the energy feeds into grid, negative value means the
energy used from the grid.
Ø
Status
Grid
Charger
Charger-Setting
Status
50
51
Setting
Setting
>
>Ua
0.0V
Ia
0.0A
PaOut
0W
InvState A
PaGrid
0W
PbGrid
0W
PcGrid
0W
Power Meter1
Grid
Charger
EPS
Load
S
ta
tu
s
Charger setting
e) Load
If the inverter is plugged with a smart plug, this status shows the real time
load power, include load1 power and load 2 power.
L1 Power
0W
Load
b) Charger
This status shows the charger situation of the system, including the battery
voltage, charge or discharge current. Charge or discharge power, battery
capacity, battery temperature, BMS status, charge and discharge limit. “+”
means in charging; “-” means in discharging.
U
400.0V
I
-1.0A
P
-400W
Charger
d) EPS
EPS will only have data when the inverter is working in EPS mode, it will show the
real time data of the EPS output such as voltage, current, power.
EPS_State A
Ua
0.0V
Ia
0.0A
PaActive
0W
EPS_S
PaS
0VA
PbS
PcS
0VA
>
>
0VA
c) Charger-Setting
Here you can see the parameters of the battery Settings (lithium battery and
lead-acid battery).
Min Capacity 10%
MaxChCur
19.0A
Max DisChCur 35.0A
Charger-Setting
Charge Absorp 0,0V
Chargr Float Vot
0.0V
DischargeCUtVot 0.0V
Charge MaxCU 0.0A
Discharge MaxCU 0.0A
Charger-Setting
