Solartron Mobrey 3595 4C, Руководство пользователя

Страница: 4 / 128

iv
35952350
SAFETY PRECAUTIONS
( continued from previous page )
SAFETY SYMBOLS
For the guidance and protection of the user, the following safety symbols appear on
the equipment:
SYMBOL: MEANING:
NOTES, CAUTIONS AND WARNINGS
For the guidance and protection of the user, Notes, Cautions and Warnings appear
throughout the manual. The significance of these are is as follows:
NOTES – highlight important information for the reader’s special attention
CAUTIONS – guide the reader in avoiding damage to the equipment
WARNINGS – guide the reader in avoiding a hazard that could cause injury or death.
AVOID UNSAFE EQUIPMENT
The equipment may be unsafe if any of the following statements apply:
•
Equipment shows visible damage
•
Equipment has failed to perform an intended operation
•
Equipment has been subjected to prolonged storage under unfavourable
conditions
•
Equipment has been subjected to severe physical stress.
If in any doubt as to the serviceability of the equipment, don’t use it. Get it properly
checked out by a qualified service technician.
LIVE CONDUCTORS
When the equipment is connected to its’ supply, the opening of covers or removal of
parts could expose live conductors. The equipment must be disconnected from all
power and signal sources before it is opened for any adjustment, replacement,
maintenance or repair. Adjustment, maintenance and repairs must be must be done
by qualified personnel, who should refer to the Maintenance Manual.
DO NOT OPEN THE ELECTRONICS UNIT WHEN IT IS ENERGISED.
EQUIPMENT MODIFICATION
To avoid introducing safety hazards, never install non-standard parts in the
equipment, or make any unauthorised modification. To maintain safety, always
return the equipment to Solartron-Mobrey for service and repair.
Fault indicator. Refer to Operating Manual for detailed
instructions of use.
Hazardous voltages.