SolarMax 10 005 380, Руководство по установке

Страница: 26 / 32

26
The time window of self-consumption is defined by the "Start time" and "End time"
parameters. Outside this time window the inverter's control of self-consumption is
inactive.
When control of self-consumption is active, the multi-function relay closes when the
inverter's output power reaches the "Enable threshold". The consumers are then
switched on. The "Enable delay" timer can be used to delay activation. When the output
power falls below the "Disable threshold", the multi-function relay opens. The consumers
are switched off.
Procedure
1. Go to the "Settings" menu and select the "I/O module" submenu.
2. In "MF relay" select the "Self-consumption" setting.
3. In "Mode" select the "Pac inverter" operating mode.
4. Configure the parameters:
Parameter Description Value range Unit
Enable threshold Activation value 100 … 10 000 W
Disable threshold De-activation value 100 … 10 000 W
Enable delay Activation delay 0 … 60 min
Start time Activation time 00:00 … 23:59 hh:mm
End time De-activation time
Procedure using MaxTalk 2
1. Start MaxTalk 2
2. Connect MaxTalk 2 to the inverter.
3. Select the inverter in the plant tree.
4. In the "Device" menu, click "Settings". The "Settings" tab will be opened.
5. In the “Mode” menu (Multi-function relay) select the "PacInv" setting.
6. Configure the parameters.