SOLARJACK PCB-120, Руководство пользователя

Страница: 2 / 10

12/06/99 2
PCB-120C
SOLARJACK'S HIGH VOLTAGE PC SERIES PUMP CONTROLLERS
SOLARJACK'S PC series controllers are state-of-the-art solid state power
converters designed as an interface between a SOLARJACK pump and the DC power
source. The purpose of this controller is to maximize the total daily water
output while providing protection for the pump as well as the power source.
The unique features incorporated in this controller will protect the pump system
insuring many years of dependable, trouble free service. When used in a solar
panel direct system it provides protection for the pump from over-voltage and
over-current conditions and will provide current boosting in low sunlight
conditions.
PCB-120 SPECIFICATIONS 1 HP
Input Voltage 100-180V (open circuit)
(Eight Panels in Series Max)
Maximum Output Current 10 AMPS
Maximum Surge Current 18 AMPS
Maximum Output Power 1200 Watts (120V @ 1OA)
FEATURES
1.)
Current Boosting for matching the load requirements of the pump.
2.)
Voltage Regulation of the PV array around its maximum power point.
3.)
Built in controller protection:
A. Output current limiting
B. Voltage surge protection
4.) Remote float switch circuit
5.)
Low water cut-off circuit with adjustable set points
6.) High water cut-off circuit with adjustable set points
7.) Electrode logic reversal switch
Remote switch logic reversal switch
8.) Power IN indicator light (Red)
Power OUT indicator light (Green)
Remote switch / electrode turn off indicator light Amber)
9.) Fuse protection on the output
10.) Weathertight enclosure