10. Select Grid Topology and select WYE.
11. If relevant, select PT Scaling and set the potential
transformer ratio. The default value is 1.
Device Configuration using the Device
Display
To configure the SolarEdge device using the device
display:
Use the four user buttons to control the LCD panel menus:
Esc: Goes to the beginning of the currently entered
parameter or to the previous menu.
Up (1) and Down (2): Moves the cursor (>) to the relevant
menu option.
Enter (3): Used to select an option
1. Verify that the device ON/OFF switch is OFF.
2. Turn ON the AC switch of the main circuit board.
WARNING!
ELECTRICAL SHOCK HAZARD. Do not touch
uninsulated wires when the cover is removed.
3. Press the Enter (3) button for at least five seconds. The
following message is displayed:
Energy Meter with Modbus Connection Installation Guide MAN-01-00269-1.5
34
Device Configuration
