Installing and Connecting the Meter
Mount the meter either directly on a flat surface, or on a DIN
rail using the DIN-rail clips supplied with the meter.
To mount the meter directly on a surface:
1. Carefully remove the terminal blocks on both sides of the
meter.
2. Use the two mounting holes on both sides of the meter to
mark the hole positions.
NOTE
Do not use the meter as a drilling guide; the drill
may damage the screw terminals and metal
shavings may fall into the connectors.
3. Use the supplied screws to mount the meter. Do not over-
tighten the screws, as long-term stress on the case can
cause cracking.
Figure 7: Meter mounting holes
Energy Meter with Modbus Connection Installation Guide MAN-01-00269-1.5
Chapter 2: Meter Installation
17
