48
UPS for 208 Vac Grid, B120US Installation Guide, doc. rel. 3.0
3.3.6.3.
Assigning IP Address to the UPS
This procedure assigns an IP address to the UPS. Assigning an IP address allows you to remotely
monitor the UPS over an IP network.
If you do not want to remotely monitor the UPS, you can skip this step. If you
decide to later implement remote monitoring, you can perform this process
at that time.
The UPS supports use of a fixed IP address, and also supports dynamic assignment of
IP addresses (DHCP). Consult your IT systems administrator and determine if your IP network
supports DHCP, and if there is a preference for using either a fixed IP address or a dynamically
assigned IP address for the UPS.
To obtain an IP address automatically:
To obtain an IP address automatically, your network must support DHCP.
1.
From the System Menu select
Setup > Connectivity > Network Configuration
.
The IP address configuration screen appears:
Figure 30: IP Address Configuration
2.
Select
Obtain an IP address automatically
checkbox.
