Solar Stik 24VDC PRO-VERTER 5000-120 AGS Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 78

Solar Stik 24VDC PRO-VERTER 5000-120 AGS Скачать руководство пользователя страница 29

|

29

June 2020

|

Solar Stik

®

, Inc.

24VDC PRO-Verter 5000-120 AGS Operator Manual

Understanding the User Interface

The PRO-Verter menu options and programming features in the user interface were developed over
10 years using real data and feedback from users around the world. They allow PRO-Verter functions
to be configured in exact accordance with mission requirements, and support operation in a flexible
“open” architecture that includes a myriad of disparate technologies commonly found in the field (i.e.
PV panels, batteries, etc.).

PRO-Verters are usually shipped pre-programmed based on the application and system
configuration prescribed by the customer, but if operating conditions warrant changes to the system
architecture, the PRO-Verter programming can be adjusted accordingly.

When configuring or making changes to a PRO-Verter programming, it is important to understand
the individual settings found in the menus, and how each one can affect overall system operation or
individual functions within the PRO-Verter itself.

Consult with Solar Stik Technical Support if changes are necessary.

Rotary
SELECT
Knob

Menu Buttons

LCD

LED Status

Indicators

ON/OFF buttons

Figure 13. LCD user interface

ON/OFF Buttons
The ON/OFF buttons allow the PRO-Verter inverter and
charger to be independently and quickly enabled or disabled.

• INVERTER ON/OFF:

This button toggles the Invert

function on and off (standby mode). The green “INV” LED
turns on and off with the button.

• CHARGER ON/OFF:

This button toggles the Charge

function on and off (standby mode) whenever the charger
is actively charging. The green “CHG” LED turns on and off
with this button.

Figure 14. Inverter/Charger ON / OFF Buttons

«
...
27
28
29
30
31
...
»

Содержание 24VDC PRO-VERTER 5000-120 AGS















































































Отзывы:

Нет отзывов