Solahart ATMOS AIR 270, Руководство по эксплуатации и установке

Страница: 21 / 40

5.Usage
17
Outlet water temperature
Time
Target temperature
Press or again to change
the target temperature.
Press
to confirm
or to
cancel, then
return to the
previous
interface.
Press once
or
to check the
target
temperature.
5.2.4 Time setting
In the standby or running interface, do as follows to set the time when in heating mode. When
press " " once, the time parameter will flash. When press " " again, the hour parameter
will flash then press " " or " " to change it. After making the changes to the parameter,
press" " to confirm, then change the minute parameter as well as the date parameter in the
same way.
If no operations are performed on the keypad for 10s, the controller exits the parameter
modification menu by timeout and the changes are confirmed.
Note: Set the date in the same way when in vacation mode.
Example: Change the time and date from 18:30 on August 4th to 17:40 on September 8th.
Time
Press
twice then
press or
to change
the hour
parameter
and press
to confirm.
Press " " or " " to change the minute
parameter.
5. Usage
18
The new set time
Press " " to confirm.
Press " " or " " to change the minute
parameter.
The date is flashing
Press once then press or to change
the month parameter and press to confirm.
Press " " or
" " to change
the dayparameter.
Press" "
to confirm
.
5.2.5 Timer setting
5.2.5.1 Under the standard mode, economic mode, intelligent mode, you can enter the timer
setting.
Press " " and hold for 2s, the "ON "and " 1 " will flash, and then you can set the turn on
time of timer1 as the 2.4 clock setting show. After finishing, " OFF " and " 1 " will flash, that
means you can set the turn off time of timer1. The "ON " and " 2 " will flash after finishing the
timer1 setting, you can set the turn on time of timer2. After finishing, the " OFF " and " 2 " will
flash, and then you can set the turn off time of timer2. Press " " again to save and back to
the interface. If you don't need to set the timer2, you can press the " " to save after finishing
the timer1 setting. You will find the " ON " and " 2 " flash. No operation for 5s, the program will
back to the interface automatically.
Note: When press " " and hold for 2s, the " ON " and " 1 " will flash. It is not necessary for
you to set the turn on time of the timer1. You can sequentially to press " " for 2s to enter to
the turn off time of timer1. So does the timer2. Or press " " or " " to circularly display.
Timer Cancel: Press " " and hold for 2s to enter into the interface, and then press " "
to cancel all the operation. Please see the following picture for more details.